About two years ago, when I chose to do a microblade (ie semi-permanent tattoo) on my bald arches, I permanently removed eyebrow care from my to-do list, and I haven’t looked back since. But now I am preparing to accept a grooming appointment. I remember that even though the microblade eyebrows require almost zero maintenance, I need to add the microblade eyebrow products to my shopping list before my meeting because of the preparation before and after the microblade And the recovery phase is quite high maintenance.
The process actually starts four weeks before your appointment. “We recommend that you have not used [exfoliating] acid or retinol for at least four weeks before Micro Blade,” Courtney Casgraux, CEO and founder of GBY Beauty in Los Angeles, told TZR. In the tattoo experience, the technician will use a sharp blade to cut small hair-like strokes on the brow bone to mimic natural hair and deposit pigment under the skin-so the skin in this area must be able to withstand the treatment. “Acid and retinol may’thin out’ or make your skin sensitive, and may cause your skin to tear during the microblade,” she said.
In about two weeks, you should be able to use any antibiotics you have prescribed before. “Antibiotics and other vitamins will dilute your blood,” Casgro pointed out. “If your blood is thin during the microblading process, you may bleed a lot, which may affect the pigment and its effect on the skin.” (Obviously, completing a prescribed antibiotic treatment is better than keeping your microblading appointment More important-so if you are still using antibiotics and your meeting is less than two weeks away, please reschedule.) One week after Microblade, she recommends removing fish oil pills and ibuprofen from your daily life ; Both have the above-mentioned blood thinning effect.
At this time, it is also a good idea to stop using any eyebrow growth products you use. “Avoid using leave-in eyebrow serums that contain ingredients such as tretinoin, vitamin A, AHA, BHA, or physical exfoliation,” Daniel Hodgdon, CEO and founder of Vegamour, told TZR. Focus your entire skin care and makeup routine on gentle, moisturizing products.
“The day before treatment, wash the area with an antibacterial cleanser,” Dr. Rachael Cayce, a dermatologist at DTLA Derm in Los Angeles, told The Zoe Report. Both CeraVe Foaming Cleanser and Neutrogena Oil-Free Acne Cleanser meet the requirements, but Casgraux asks her client to clean with Dial soap the night and morning before the date. (No, Dial soap is not the best for the skin on your face in the long term; but it creates a bacteria-free canvas for the microblade, so this time it is worth it.) Face cream,” she added.
On the day of your microblade treatment, it is important that the skin around the eyebrows does not crack or become inflamed beforehand. “[On irritated skin] the use of micro blades leads to an increased risk of scarring or dye reaction,” said Dr. Casey. Even if your skin is completely clean, there is always a risk of infection or an allergic reaction to tattoo pigments.
Before the blade touches your eyebrows, the beautician will usually use a numbing cream containing lidocaine to desensitize the area (I promise, you won’t feel any). “The numbness process usually takes about 20 minutes,” Casgraux said, preferably to a professional. It’s finally time for the highlight.
Once your eyebrows are drawn, you are ready to play the waiting game. “If the customer’s skin is particularly dry and it looks likely to be crusted, I will use Aquaphor to send them home,” Casgraux said-but other than that, no products are recommended.
The complete healing process takes about a week and a half, during which you should avoid many things: rubbing the area, under the sun, painting your eyebrows, and moistening your eyebrows. Yes, the last one may bring some challenges. In addition to minimizing showering, wearing a mask, and exercising, applying a layer of coating to the microblade area of Aquaphor before entering the shower is also helpful, as it forms a waterproof barrier; you can even put a plastic wrap strip on the top to prevent Provide additional protection. For skin care, skip the rinse method of splashing water on your face and use a wet towel instead. “A wide range of mineral sunscreens should also be used outdoors,” said Dr. Casey.
“You will notice that before the healing process is complete, the microblade area will become dry and flaking,” Casgraux said. “The area will gradually darken for three or four days before the pigments are brightened.” If your eyebrows are particularly dry or peeling, add more Aquaphor. Follow this post-care protocol for 7 to 10 days.
“Once the microblade skin is completely healed—that is, the scab is over—it is safe to resume using eyebrow growth products,” Hodgdon said. Don’t worry that your growth serum will interfere with your fresh tats. “The ingredients in typical eyebrow growth products do not affect the microblade pigments because they do not contain bleach or chemical exfoliants,” he said. “On the contrary, because the best eyebrow products will support your eyebrow area to grow more hair naturally, the eyebrows will only look denser, healthier, and more natural.”
As for the best cosmetics to use in the area? Well, no, really. “The point is really that you shouldn’t need it,” Robin Evans, a New York City eyebrow expert with more than 25 years of experience, told TZR. She insists that certain colors and formulas, especially eyebrow powder, can make the final effect look distorted or dull. “However, I do have some clients who still like that fluffy look, so eyebrow gel or eyebrow mascara is great for brushing them and giving them a feathery feel,” she said.
In order to make your microblade eyebrows look sharp, sunscreen is once again the solution to all problems. “Applying it to the tattoo every day can prevent fading,” Evans said.
Before that, you need everything before and after the microblade to ensure you get the best results before and after the photo.
We only include products independently selected by the TZR editorial team. However, if you purchase products through the links in this article, we may receive a portion of the sales.
The hero product behind the micro blade, because it forms a barrier on the skin to protect your perfectly carved eyebrows from external contamination.
This non-irritating ointment is very suitable for use after treatment or between treatments because it retains pigments well and does not clog pores.
In order to promote the growth of natural eyebrows, choose Brow Code’s growth oil. “All ingredients are 100% natural and are specially selected and blended to nourish, strengthen and promote the health of the eyebrows. Used every night, this will help nourish the eyebrows and promote the appearance of thicker and longer hair,” Melanie Marris, celebrity eyebrow stylist and founder and CEO of Brow Code said
The favorite of this dermatologist is mild and antibacterial. Use it the day before the appointment.
“We recommend that customers use Dial to wash their faces the night before or on the day of service,” Casgraux said.
During the healing process, you only need this ointment. Apply once a day to prevent dryness and crusting of the skin.
“When you are outdoors, you should apply a wide range of mineral sunscreen to the area,” Dr. Case said. It protects the skin of fresh blades and prevents fading.
Use Glossier Boy Brow Coating to add some natural, fluffy scent to your microblade eyebrows-because it is not powdery or applied to the skin of the brow bone, it will not dull the appearance of the tattoo.
If you want your eyebrows to grow naturally, choose a clean, vegan growth serum like Vegamour. It will not affect the microblade pigment, but *will* provide a natural dense arch.
Post time: Aug-23-2021